Linux SoM
This is the catalog of single parts related to the FOX Board G20.
Visit the evaluation kit catalog to save money and have all you need to getting start.
 | FOX Board G20 is a "ready-to-run" Embedded Linux System perfect to use as a solid state WEB server or as a core engine for your embedded appliances. A fully Open Source environment is available to customize and build your own kernel image or to develop user applications using standard GNU tools. Version with Atmel AT91SAM9G20 with 256KB of FLASH memory, 64MB of RAM and up to 16GB of microSD. FOXG20 needs some extra accessories in order to be operative:
An evalution kit with all the accessories you need to get started with FOX Board G20 is available on-line on this link: COMBO-2. | More info... | |
 | DAISY-1 is a pluggable adapter for the NETUSG20 module that provides 8 connectors compatible with the Acme Daisy Cabling System. | More info... | |
 | FOX size prototyping board. |
 | Eurocard size (160x100 mm) prototyping board 2.54 mm pitch for FOX Board G20 or FOX Board LX832. |
 | Set of 10 strips of 20x2 pin pitch 2.54mm lenght 6mm |
 | Set of 10 strips of 20x2 headers pitch 2.54 mm |
 | Set of 10 strips of 20x2 pin pitch 2.54mm lenght 12mm |
 | Bootable 4GB class 4 microSD memory card with a preinstalled Debian Linux distribution for the FOX Board G20. Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included. | How to make by yourself this memory card using a blank microSD | |
 | Bootable 8GB class 4 microSD memory card with a preinstalled Debian Linux distribution for the FOX Board G20. Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included. | How to make by yourself this memory card using a blank microSD | |
 | Bootable 16GB class 4 microSD memory card with a preinstalled Debian Linux distribution for the FOX Board G20. Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included. | How to make by yourself this memory card using a blank microSD | |
 | Features:
|
 | DPI is an USB-to-serial interface to link the Acme boards debug port to a PC USB host port and have access at the Linux system console using a terminal emulator program like minicom, putty, hyperterminal, etc. | More info... | |
 | Lithium battery model CR1220 at 3 volt for RTC circuitry on: |
 | FOXCASE is a transparent plastic enclosure for the FOX Board G20. | More info... | |
 | FOXCASE is a black plastic enclosure for the FOX Board G20. | More info... | |
 | Plastic case for the FOX Board G20 that resembles the very popular Linux icon TUX drawn by Larry Ewing. This is just the plastic enclosure. To run Linux inside it you need a FOX Board G20 | More info... | |
This is the catalog of single parts related to the Aria G25.
Visit the evaluation kit catalog to save money and have all you need to get started.
 | Aria G25 is a small and low-cost multi-chip module that integrates:
| More info... | |
 | Aria G25 is a small and low-cost multi-chip module that integrates:
| More info... | |
 | Aria G25 is a small and low-cost multi-chip module that integrates:
| More info... | |
 | SMD power supply module for Aria G25 based custom boards | More info... | |
 | Switching power supply for PS3V3 DC/DC converter module:
|
 | Power supply module that meets all the AT91SAM9G20 CPU power requirements and power-up and power-down sequences to guarantee reliable operations. | More info... | |
 | EPS is a DC-DC converter with an input range of 7 to 28 Volt DC output 5 Volt DC @ 2A. | More info... | |
 | RJ45 LAN Transformer Ethernet 10/100 Base-T connector |
 | USB A host connector |
 | 1.10mm pitch microSD memory holder push-push type |
 | 1.10mm pitch microSD memory holder, hinge Type, |
| DPI is an USB-to-serial interface to link the Acme boards debug port to a PC USB host port and have access at the Linux system console using a terminal emulator program like minicom, putty, hyperterminal, etc. | More info... | |
 | Bootable 4GB class 4 microSD memory card with a preinstalled Debian Linux distribution for the Aria G25 board. Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included. | How to make by yourself this memory card using a blank microSD | |
 | Bootable 8GB class 4 microSD memory card with a preinstalled Debian Linux distribution for the Aria G25 board. Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included. | How to make by yourself this memory card using a blank microSD | |
 | Bootable 16GB class 4 microSD memory card with a preinstalled Debian Linux distribution for the Aria G25 board. Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included. | How to make by yourself this memory card using a blank microSD | |
 | Battery holder for lithium battery CR1220. Through hole mount. |
 | Battery holder for lithium battery CR1220. SMT mount. |
| Lithium battery model CR1220 at 3 volt for RTC circuitry on: |
 | Winstar display model WO1602I-TFH-AT#
|
 | Microsoft LifeCam HD-3000 webcam |
 | Microsoft LifeCam HD-5000 webcam |
This is the catalog of all the Daisy add-on module available.
 | DAISY-3 is led based logic line state monitor useful to check the logic state of any daisy line Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | Daisy-7 is a 9 Degrees of Freedom module (9DOF) with digital MEMS (accelerometer, gyroscope, compass, barometer) and a GPS receiver IC in just 4x4cm. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | GPS active antenna with SMA male connector to use Daisy-7 add-on board. |
 | DAISY-8 is a 2 relay and 2 input interface for Terra and FOX Board Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | DAISY-10 is an isolated RS485/RS422 interface. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | DAISY-9 is RS232 DTE serial interface, not optoisolated, with TXD, RXD, CTS and RTS signals. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | DAISY-18 is an opto-isolated 0-48 volt 4ch input for industrial purposes. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | DAISY-19 is an opto-isolated 0-48 volt solid state 4ch switch for industrial purposes. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | Front-end for the 4 channel A/D 10bits converter built-in the Atmel CPU. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | Daisy-24 mini alphanumeric I2C 16x2 characters LCD module with 4 push buttons. Usable as Terra Board front panel or as normal Daisy module for other board with Daisy connectors.
Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM). It is not needed if you plug
it directly on a Terra board. |
 | Daisy to XBee module adapter
Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | Daisy M-Bus adapter with Amber AMB8426-M module. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | GSM/GPRS Rubber Antenna for TERRA-M board or DAISY-31 M-Bus adapter. Features:
|
 | DAISY-4 is a single relay Daisy module. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
| DAISY-1 is a pluggable adapter for the NETUSG20 module that provides 8 connectors compatible with the Acme Daisy Cabling System. | More info... | |
 | DAISY-5 is simple module with 8 push buttons useful for lab experiments. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | DAISY-11 is simple module with 8 leds useful for lab experiments. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | DAISY-12 is a 40x40 mm prototyping board with daisy IDC connector mounted and small soldering area to create your custom daisy add-on module. Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | 4D Systems LCD display model uLCD-32PTU
Wireable to the Daisy Cabling Systems using a DAISY-15-R adapter. |
 | Daisy adapter for LCD-3 display (4Dsystems ULCD-32PTU) Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) |
 | Audio adapter for FOX Board G20 Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM) | More info... | |
 | 20 cm ribbon cable with 10 wires compatible with the Acme Daisy Cabling System. At least one of these cables is required to connect each Daisy module. if you need different lengths please consider making your own the cable using the IDC socket JJ-02291-10P-F and the flat cable FC-3754-1M. |
 | IDC connector with 1.27mm spaced dual-row pin headers. The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto FLAT-20CM flat ribbon cable for Daisy cabling system. This female socket is designed to be connected to the male header on the Daisy modules. A polarizing tab in the middle ensures the correct orientation. | Datasheet | |
 | Daisy IDC male SMT connector for PCB mounting | Datasheet | |
 | 1 meter of grey conductor flat cable, .025" pitch, 10 wires at 30 AWG, to use for Daisy wiring. | 3M Datasheet | |
 | Set of 100 screws M2 length 4mm for daisy modules:
|
 | Set of 1000 screws M2 length 4mm for daisy modules:
|
 | Pack of 4 pcs of M2 spacer height 5 mm with metric thread internal to use with the screws M2X4 to mount the daisy module on a base panel. |
 | Basic kit to evaluate the Aria G25 SoM or to develop applications with TERRA board SBC. Parts included:
|
 | Enhanced kit to evaluate the Aria G25 SoM or to develop applications on TERRA board SBC. Parts included:
|
 | Basic kit to evaluate the Aria G25 SoM or to develop applications on TERRA-M board SBC. Parts included:
|
 | Enhanced kit to evaluate the Aria G25 SoM or to develop applications on TERRA-M board SBC. Parts included:
|
 | Basic starter kit with all the hardware you need to get started with the FOX Board G20 Linux Embedded Single Board Computer Parts included:
|
|
|
Atmel© Certified Partner |
Documentation Terms of Use
Acme Systems provides this documentation "as is" without warranty or guarantees of any kind.
The mantainer of this site (Sergio Tanzilli), has gone to a great deal
of effort into making this documentation as correct as possible.
Acme Systems doesn't provide any direct support for the Open Source preinstalled software but provides, through
these pages and forum posts, all the information required to obtain the sources, install, use and update the
Open Source softwares runnable on the FOX Board, NetusG20, AriaG25 and Terra platforms.
Please note that all the preinstalled softwares, used on the Acme Systems products, are Open Source and you will
have to check the license terms provided (usually the GPL) by each author before using it in any commercial or non-commercial
product, by yourself.
Before sending emails or calling the Acme staff here are our contacts
please note that WE ARE MAINLY HARDWARE DESIGNERS and NOT LINUX GURUS so could be better to post
your questions directly to the forum listed below to be sure that all the contributors of this site and
the large software developers community will read and reply to your questions.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
